Dual-axis Gun Drilling Machine Tool ZK2115 E X2/1000

Overview:
Processing Method:  outside chip removing; gun drill
Hole Diameter(mm):  Φ5~Φ15
Hole Depth(mm):  1000
Axis Centre Distance(mm): 207 (can be customized)
NC System:  GSK980TDC / FANUC OI Mate TC
Drill Pipe:  frequency control; simultaneously rotating and feeding
Workpiece:  NC indexing
Guide Sleeve:  hydraulic drive, axial positioning
Workpiece Clamping:  the left side of workpiece is clamped by hydraulic chuck, the right side is supported by hydraulic centre bracket, around axis indexing can be numerical controlled;
                   Drill two holes at one time
Parameter:
Processing Ability:
1.  Number of Spindle(pcs):  2
2.  Axis Centre Distance(mm): 207
3.  Hole Diameter(mm):  Φ5~Φ30
4.  Hole Depth(mm):  ≤1000
4.  Max  Workpiece Diameter (mm):  ≤Φ270
5.  Length Range of Workpiece(mm):  ≤1000
6.  Bench Traverse Distance(mm):  200
Processing Speed:
1.  Max Rotation Speed of Drill Pipe’s Spindle (r/min):  5500
2.  Feeding Speed Range(mm/min):  ≤1500
3.  Forward Speed(mm/min):  ≤2000
Processing Accuracy:
1.  Hole Skewness:  ≤1/1000 (draw ratio≤100)
2.  Dimensional Accuracy of Drill Pipe:  IT7~IT11
3.  Hole Rugosity:  Ra0.8~Ra3.2
Power of Machine
1.  Drill Pipe Motor Power(kw):  5.5
2.  Oil Pump Power(kw):  7.5(double pump group)
3.  Feeding Power(kw):  1.2
                      7.0(M.N)
4.  Power of Oil-temp Cooling Machine(kw):  3.5
5.  Total Power(kw):  29
Hydraulic System
1.  Max Volume of Flow(L/min):  80
2.  Max Pressure(Mp):  12
3.  Filtering Accuracy(um):  20
4.  Oil Storage Capacity(L):  1360
Basic Dimension & Weight
1.  Dimension (mm):  5100*2700*1800(L*W*H)
2.  Height between Drill Pipe Centre and Ground(mm):  1070
3.  Weight of Hydraulic System (kg):  2500
4.  Weight of Main Engine(kg):  5000